Platform

See what your refrigerated fleet is actually doing.

One platform for temperature, location, energy, equipment health and measured savings — built for non-engineers first, with full technical data underneath.

Pilot Vehicle RF-018Illustrative demo data
Cargo temp
4.3°C
Target
2–8°C
Ambient
46.2°C
Battery SOC
71%
Battery SOH
97%
Solar today
7.6 kWh
TRU consumption today10.4 kWh
Depot charge3.2 kWh
Door open events14
TRU runtime6h 42m
Temperature compliance 100%
Savings: calculated after baseline and pilot measurement.

Six views. One source of truth.

Cold chain monitoring

Cargo, supply-air and return-air temperatures, door events, excursions and time outside range.

Fleet tracking

Location, routes, stops, trip duration, depot arrival/departure and operating history.

Energy intelligence

Battery SOC/SOH, solar generation, charging mix and refrigeration energy consumption.

Performance

System uptime, refrigeration runtime, compressor operation and fault events.

Savings verification

Measured and normalized before/after comparison against an agreed baseline.

Reports

Vehicle-level and fleet-level reports for operations, engineering and management.

Verified savings — the important part

Savings are measured, not assumed.

A simple before/after can mislead — one month may be hotter, a route may have more stops. We normalize for real operating variables.

Baseline
2–4 weeks (30 days recommended) of the existing system
Normalize
Refrigeration hours · ambient · set point · door behavior · route · stops · distance
Verified saving
Expected conventional cost − actual new-system cost, under equivalent conditions

We use terms such as measured saving, verified saving and normalized saving. We do not promise a universal percentage until the data supports it for a defined vehicle and use case.

Put the platform on your routes.

Start with a small number of vehicles and measure real operation before a wider rollout.